Instructions and Application
Permit type
| Primary permit type requested |
---
|
| Are you requesting an additional permit OTHER THAN WHAT YOU REQUESTED ABOVE? (select all that apply) |
---
|
| Will you be adding any electrical work to this project? |
---
|
Property information
| WORK SITE ADDRESS-include only the ADDRESS NUMBER, UNIT NUMBER/APT (if applicable) , & STEET (not the contractor's company address) |
---
|
| Property type |
---
|
Who is applying for the Building Permit?
| Who is applying for the building permit |
---
|
Owner's information
| Property owner's FIRST name |
---
|
| Property owner's LAST name |
---
|
| Property owner's address-ADDRESS NUMBER AND STREET |
---
|
| City |
---
|
| State |
---
|
| Zip Code |
---
|
| Property owner's telephone number |
---
|
Residential detail
| Is this property located in the Lake Barrington Shores Gated Community? |
---
|
Description of work
| Please provide a detailed description of the work to be performed. |
---
|
Site plan
| Attach a site plan here - zip files and spreadsheets are NOT accepted |
---
|
Manufacture's Specifications
| Upload the manufacture's specifications for the products to be used. - zip files and spreadsheets are NOT accepted |
---
|
Value of work
| Total cost of the project. |
---
|
Who is performing work
| Who will be performing the work? |
---
|
| Is there a subcontractor for this project? |
---
|
Contractor information
| Contractors COMPANY NAME or name of contractor if NOT a company |
---
|
| Contractors address, include city and zip code |
---
|
| Contractors phone |
---
|
| Contractors email address |
---
|
Contractor Proposal
| Upload a copy of the contractors proposal. - zip files and spreadsheets are NOT accepted |
---
|
Acknowledgement of Covenants & Affidavit
Acknowledgement of Covenants
| I have read and agree to the above statement. |
---
|
Affidavit
| I have read the affidavit and I agree to the terms of the permit. |
---
|
B&F Plan Review
Permit Type
| Permit Type |
TEST TEST TEST TEST TEST TEST TEST TEST TEST TEST TEST
|
Building inspections required-Placard
| Building inspections Required |
Soil Erosion/Sediment Control Inspection-contact Engineer to schedule, Rough Base BEFORE placing asphalt, Rough Base BEFORE placing Pavers/Concrete, Rough Building BEFORE TRIM, Rough Building , Rough Electrical, Rough Mechanical, Rough Ice and Water Shield, Rough Post Hole BEFORE concrete is poured, Rough-Fire Protection BEFORE insultation- HYDRO, Final Building, Final Electrical , Final Fire Protection, Final Mechanical, Final Plumbing , Final Engineering (As Built Survey & Final Site Visit Approval Required
|
Additional Permit Information
| Add any additional information needed on the placard |
TEST
TEST
TEST
TEST
|
| License Number |
10-000
|
Plan review notes
| Miscellaneous Plan Review Notes |
The maximum u-factor shall be 0.30., The ice barrier shall consist of not fewer than two layers of underlayment cemented together, or a self-adhering polymer-modified bitumen sheet shall be used in place of normal underlayment and extend from the lowest edges of all roof surfaces to a point not less than 24 inches inside the exterior wall line of the building. On roofs with slope equal to or greater than 8 units vertical in 12 units horizontal, the ice barrier shall also be applied not less than 36 inches measured along the roof slope from the eave edge of the building., Lateral load shall comply with section R507.9.2 of the 2018 International Residential Code., Rail and floor replacement only. Any change to the framing shall require an additional Rough inspection., Stairs shall have a graspable handrail and shall be continuous for the full length of the flight, from a point directly above the top riser of the flight to a point directly above the lowest riser of the flight. Handrail ends shall be returned or shall terminate in newel posts or safety terminals., Provide Structure hold-downs to secure shed., Anchor bolts shall be a minimum 12” from corners and joints in bottom plates and 6’ maximum spacing between bolts., Hot/Cold water pipes and Gas pipe shall be bonded at water heater., The exterior gas pipe is to be painted for corrosion protection, Two (2) ground rods minumum of 6 feet apart or 25 Ohms, Window replacement requires nail fins on all four (4) sides and to be sealed
|
Fee determination
| Decks: Number of additional square feet (above 200) for fee calculation |
0
|
| Signs: Confirm # of extra square feet above 30 for signs |
---
|
| Fences: Confirm number of feet for fence fee above 285 |
---
|
| Should additional inspection fees be added to total? |
---
|
| Additional custom fee to be added |
---
|
Issue Permit
Permit Issued
| Today's date |
---
|
| Expiration date |
---
|
| Permit Number |
---
|
| Is a permit extension needed for this project? |
---
|
.png "Organization Logo"){kind=logo}